MEP Coordination Services

Every MEPF Trade Coordinated and Clash-Resolved in the Model, Before It Reaches the Field

Modeling each individual MEPF trade, covering mechanical/HVAC, electrical, plumbing, and fire protection systems into a federated master model. Conflicts between trades, ductwork crossing pipe runs, conduit competing for the same ceiling space, are identified and resolved to prevent costly rework when your crews are already in the field. Delivered as clash-free, coordinated MEP models built to your project standards with clash log and report. Handled your project entirely by direct Gsource employees, under ISO-certified delivery.

17+

Years of Experience

1,000+

BIM Models Monthly

300-350

Coordinated LOD Model

50+

BIM Specialists

MEP Coordination Services
Services & Deliverables

MEP BIM Coordination Services We Deliver

We deliver at production scale, to your standards. A 50+ specialist MEP BIM team produces 1,000+ coordinated Revit models monthly, at LOD 350.

What we deliver
  • Clash-resolved MEP Revit models (LOD 350)
  • Ceiling/plenum and shaft coordination
  • Equipment room coordination for mechanical, electrical, and plumbing rooms
  • Routing priority and trade hierarchy resolution (gravity drainage, large ductwork, cable trays, pressurized piping, and fire protection piping)
  • Penetration, sleeve, and hanger/support coordination
  • Clearance and access coordination for valves, panels, and serviceable equipment
  • Clash logs and reports
  • 2D coordinated MEP composite drawings extracted from the model
Output formats

RVT, NWC/NWD, IFC, DWG, and views (PDF), to your standards.

Best for

MEP contractors, GCs, and VDC/BIM teams needing conflict-free, install-ready MEP.

Typical turnaround

Scoped to your area/level and schedule, set at kickoff; scales with scope

Not sure which output fits your project?

Quality, Measured

Track Record in Numbers *

Numbers our clients hold us to, measured across every drawing and model we deliver.

98.5%*

On-time delivery

Drawing sets delivered on the schedule agreed at project kickoff, so your permit submissions and downstream project timelines stay on track.

98%*

Drawing accuracy

Verified against internal QC checklists and applicable code requirements before a set ever reaches your desk.

95%*

First-time client approval

Drawing sets approved by architecture firms on the first review round, with minimal revision cycles needed.

<0.5%*

Revision request rate

Requests for rework after delivery, a reflection of the accuracy built into the drafting process from the start.

Based on internal production and QA data, Jan-Jun 2026, next refresh Jan 2027.
Case Studies

MEP Coordination Projects We've Delivered

Client identities protected under NDA. Project details verified.

MEP Coordination

Coordinated MEPF BIM Modeling for a 350K Sq. Ft. Institutional

Outcome
The client received a coordinated MEPF model covering all 16 levels of the library, along with drawings in the formats its teams already used.

Institutional Library Building

Read full case study
MEP Coordination

Clash-Free MEPF Model for 6-Story, 340K Sq. Ft. Facility

Outcome
By engaging with Gsource, the client received a fully coordinated, construction-ready MEPF model on schedule, without adding staff or stretching the internal team.

Healthcare Facility Renovation

Read full case study
MEP Coordination

Fire Protection Revit Modeling for a 350K Sq. Ft. Library

Outcome
Working with Gsource's dedicated team, the CM received a precisely coordinated fire protection 3D model and drawing set that held its alignment through continuous architectural and structural design changes.

Institutional Library Building

Read full case study
Testimonials

What MEP Leaders and GCs Say

“

Gsource coordinated all MEP trades for a 16-story institution and delivered clash-resolved models on our submittal schedule. The ceiling and plenum conflicts were gone before our crews got there.

VP of Preconstruction
Mechanical Contractor, US
“

Dense plant-room and service-corridor MEP across a hospital floor, federated and clash-resolved, so we installed without the usual rework.

Preconstruction Manager
General Contractor, US Southeast
“

We handed over our trade models to Gsource and got back a clean, federated set with penetrations and supports resolved to our standards, plus a clear clash report.

VDC Lead
Electrical Contractor, US Midwest

Clients are anonymized under NDA.

Why Gsource

Why Outsourcing MEP Coordination Services to Gsource

A Dedicated MEP BIM Team, 50+ Specialists

Your model runs on a dedicated bench producing 1,000+ Revit models monthly, not a shared queue. Scale up or down without hiring modelers.

Modeled to Your LOD and Revit Standards

We adopt your Revit templates, shared parameters, families, view templates, and BIM Execution Plan from day one, and model to the exact LOD your project requires.

Coordination-Ready and Fabrication-Ready

Models built to federate cleanly, survive clash detection, and carry through to shop and spool drawings.

Direct Employees Only, No Subcontractors

Every MEP BIM modeler is a direct Gsource employee, so your models and project data stay within one accountable, ISO 27001-certified organization.

Dedicated Account Manager

A named account manager and project lead, not a shared queue or ticketing system, with coverage aligned to your time zone.

Our Process

MEP Coordination Services Workflow

1

Standards & LOD Onboarding

We align on your Revit templates, families, and LOD targets, sign the NDA, and confirm the trade models you'll be providing.

2

Model Intake and Federation

Mechanical/HVAC, electrical, plumbing, and fire protection models are federated into a single coordination model from your inputs.

3

Full Coordination Production

Trade-by-trade coordination and interference resolution on your schedule.

4

Clash Detection and Coordination

Checked across MEP trades, identified clashes, and resolved conflicts to produce a precisely coordinated model.

5

QA and Sign-Off Review

Every model passes quality review before delivery, aligned with ISO 9001 standards.

6

Delivery and Handoff

You receive coordinated LOD 350 models and clash reports, deliverables in RVT, NWC, NWD, IFC, and DWG formats, with a full index and log.

Our Tools

Built for Your System

No tool retraining. We adapt to your standards. We onboard to your CAD/Revit templates and standards in week one.

Autodesk Revit Navisworks Autodesk ReCap BIM 360 / ACC AutoCAD

Book a free consultation

Get expert support to streamline your next project.

Free Initial Consultation, No Commitment Required

Free Initial Consultation, No Commitment Required

NDA on Every Project, ISO 27001 Certified

NDA on Every Project, ISO 27001 Certified

17+ Years of Drafting, Design and BIM Delivery

17+ Years of Drafting, Design and BIM Delivery

$2M Professional Liability (E&O) Insurance

$2M Professional Liability (E&O) Insurance

Industry Standards Compliance Guaranteed

Industry Standards Compliance Guaranteed

Direct Employees Only, No Subcontractors

Direct Employees Only, No Subcontractors

Upload a File (Optional)

You can upload a maximum of 3 files at a time & File(s) size limit is 20MB.

Got a bigger file? Just drop a shareable link in the description instead.

Frequently Asked Questions

MEP coordination services provide 3D models for a building with coordinated mechanical, electrical, plumbing, and fire systems, so they fit and install without conflict. The coordination is done after the models are built and is widely used to prevent costly reworks or conflicts among trades before reaching on-site.

Modeling creates individual MEP trade models. Coordination happens after modeling, checking those trade models against each other, and resolving clashes between them. Modeling and coordination are different tasks that come under the MEP BIM Services.

Yes, we start working directly from your existing Revit models and 2D plans and then coordinate across all MEP trades. If those models haven't been built yet, we can work from your drawing set and scanned inputs.

We deliver both. First, we build a federated model and coordinate across all MEP trades and then extract installation drawings from the model.

Yes, we start coordination when the design of the other trades or disciplines still evolve by updating the changes and resolving any clashes.

Pricing depends on the engagement model and is scoped to your project's area, volume, and complexity. See our engagement model.

We operate under a signed NDA, hold ISO 27001 certification for information security, and use direct employees only. All deliverables remain your intellectual property.

We secure your compliance needs and audits by following our detailed QA process, and records involve a traceable history of re-checks, clash reports, suggested issues, and their resolutions.

Get a Coordinated MEP Model to Prevent Costly Conflicts in the Field

Discuss your MEP coordination scope and Revit standards with our BIM team. We'll walk you through similar projects and send a vendor onboarding pack within one business day of a mutual NDA.

NDA available on request · ISO 27001 protocols for large-file scan data · $2M E&O insurance · MSA-ready

Typical First-Call Agenda

  • 1Trades, scope, and schedule
  • 2Revit templates and BIM Execution Plan
  • 3Inputs you provide (models, CAD, and scans)
  • 4Output (2D drawings extracted from the model vs 3D Revit models)
  • 5NDA, MSA, insurance, and ISO documentation

(Enter captcha image text in box)

USA (Corporate Address)

UAE

Pune